This page has changed since the print version was published. View revisions here.
Electrical Engineering (B.S.E.E. and B.S.T.E.)
The Electrical Engineering Department offers two engineering programs: Electrical Engineering and Telecommunications Engineering. The Electrical Engineering program offers students an opportunity to acquire a solid foundation in the broad areas of electrical engineering and emphasizes advanced study in digital systems, telecommunications, and microelectronics.
The Electrical Engineering program offers students a solid educational foundation in the areas of electrical networks, electronics, electromagnetics, computers, digital systems, and communications and is accredited by the Engineering Accreditation Commission of the Accreditation Board for Engineering and Technology (ABET). Mastery of these areas provides students with the ability to adapt and maintain leadership roles in their post-baccalaureate pursuits through the application of fundamental principles to a rapidly changing and growing discipline.
Students in the Electrical Engineering program take either the general program or specialize in microelectronics or telecommunications, and can take advanced courses in computer hardware and software; the analysis and design of analog and digital communication systems; analog and digital signal processing; the analysis, design, and fabrication of microelectronic components and systems; and guided and unguided wave propagation. A broad choice of electives (within and external to electrical engineering) allows students to broaden their education as well as develop expertise in areas of particular interest. In keeping with the role of a professional, students are expected to develop communication skills and an awareness of the relationship between technology and society.
The Telecommunications Engineering program is interdisciplinary. Telecommunications Engineering requires a blend of knowledge from the areas of Electrical Engineering, Computer Science, and Economics/Policy.
The Electrical and Telecommunications Engineering programs are based on a solid foundation of science and mathematics coursework. Students in these programs are given an opportunity to learn to extend their abilities to analyze and solve complex problems and to design new uses of technology to serve today's society. The engineering programs provide an integrated educational experience directed toward the development of the ability to apply pertinent knowledge to the identification and solution of practical problems in electrical and telecommunications engineering. These programs ensure that the design experience, which includes both analytical and experimental studies, is integrated throughout the curriculum in a sequential development leading to advanced work. Design problems are frequently assigned in both lecture and laboratory courses. Each student is required to complete a major design project during the senior year. In addition, established cooperative education programs with area industry further supplement design experiences.
Mission of the Electrical Engineering Program
The focus of the Electrical Engineering degree is to provide excellent education in modern electrical engineering practice. Our graduates are uniquely qualified for rewarding and successful careers in materials, devices, circuits, digital systems, signal processing, and communications. In the spring of 2005 the EE faculty adapted a new set of Program Educational objectives which refined the prior objectives and established measurements and benchmarks to monitor progress. The ECS Office of Assessment developed a new Alumni Survey instrument to measure progress toward these objectives and conducted a preliminary survey to collect data. The results of this survey should be available in the fall of 2005. The Electrical Engineering faculty will set the thresholds for performance based on this survey in the fall of 2005.
Specific Program Educational Objectives
One broad goal for the Erik Jonsson School is an excellent education for our students. Our earlier Program Educational Objectives (PEOs) toward this goal are:
Additional Program Educational Objective for a high quality educational infrastructure include:
Our most recent set of Program Educational Objectives and the measurement associated with each is listed below:
High School Preparation
Engineering education requires a strong high school preparation. Pre-engineering students should have high school preparation of at least one-half year in trigonometry and at least one year each in elementary algebra, intermediate and advanced algebra, plane geometry, chemistry, and physics, thus developing their competencies to the highest possible levels and preparing to move immediately into demanding college courses in calculus, calculus-based physics, and chemistry for science majors. It is also essential that pre-engineering students have the competence to read rapidly and with comprehension, and to write clearly and correctly.
All lower-division students in either Electrical Engineering or Telecommunications Engineering concentrate on mathematics, science and introductory engineering courses, building competence in these cornerstone areas for future application in upper-division engineering courses. The following requirements apply both to students seeking to transfer to U.T. Dallas from other institutions as well as to those currently enrolled at U.T. Dallas, whether in another school or in the Erik Jonsson School of Engineering and Computer Science.
All engineering degree plans must satisfy the requirements specified by the Accreditation Board for Engineering and Technology (ABET). The course work must include at least:
Although the electrical engineering and telecommunications engineering curricula that follow have been designed to meet these criteria, students have the responsibility, in consultation with an advisor, to monitor their own choice of courses carefully to be certain that all academic requirements for graduation are being satisfied. Students are strongly encouraged to take courses in such subjects as accounting, industrial management, finance, personnel administration, and engineering economy.
Bachelor of Science in Electrical Engineering
This catalog is a general information publication only. It is not intended to nor does it contain all regulations that relate to students. The provisions of this catalog do not constitute a contract, express or implied, between any applicant, student or faculty member and The University of Texas at Dallas or The University of Texas System. The University of Texas at Dallas reserves the right to withdraw courses at any time, to change fees or tuition, calendar, curriculum, degree requirements, graduation procedures, and any other requirements affecting students. Changes will become effective whenever the proper authorities so determine and will apply to both prospective students and those already enrolled.
Statement on Equal Educational