Erik Jonsson School of Engineering and Computer Science Interdisciplinary Programs
Telecommunications Engineering (B.S.T.E.)
Goals for the Telecommunications Engineering Program
The focus of the UT Dallas's Telecommunications Engineering degree is to provide excellent education in modern communications networks and systems. Our graduates shall be uniquely qualified to apply traditional engineering design and problem solving skills in modern telecommunications.
Educational Objectives for the Telecommunications Engineering Program
On completion of the BS program students should:
- Have a successful, long-lived, engineering based career path
- Meet the needs of industry
- Contribute to, and/or lead, engineering based teams
- Actively pursue continuing (lifelong) learning
High School Preparation
Engineering education requires a strong high school preparation. Pre-engineering students should have high school preparation of at least one-half year in trigonometry and at least one year each in elementary algebra, intermediate and advanced algebra, plane geometry, chemistry, and physics, thus developing their competencies to the highest possible levels and preparing to move immediately into demanding college courses in calculus, calculus-based physics, and chemistry for science majors. It is also essential that pre-engineering students have the competence to read rapidly and with comprehension, and to write clearly and correctly.
All lower-division students in either Electrical Engineering or Telecommunications Engineering concentrate on mathematics, science and introductory engineering courses, building competence in these cornerstone areas for future application in upper-division engineering courses. The following requirements apply both to students seeking to transfer to UT Dallas from other institutions as well as to those currently enrolled at UT Dallas, whether in another school or in the Erik Jonsson School of Engineering and Computer Science.
All engineering degree plans must satisfy the requirements specified by the Accreditation Board for Engineering and Technology (ABET). The course work must include at least:
- One year (32 SCH) of an appropriate combination of mathematics and basic sciences
- One and one-half years (48 SCH) of engineering topics
- A general education component that complements the technical content
Although the electrical engineering and telecommunications engineering curricula that follow have been designed to meet these criteria, students have the responsibility, in consultation with an advisor, to monitor their own choice of courses carefully to be certain that all academic requirements for graduation are being satisfied. Students are strongly encouraged to take courses in such subjects as accounting, industrial management, finance, personnel administration, and engineering economy.
Academic Progress in Telecommunications Engineering
In order to make satisfactory academic progress as a Telecommunications Engineering major, a student must meet all University requirements for academic progress, and must earn a grade of C- or better in each of the major core courses. No "Major Requirement" course (as listed under Section II of the B.S.T.E. degree requirement) may be taken until the student has obtained a grade of C- or better in each of the prerequisites (if a higher grade requirement is stated for a specific class, the higher requirement applies).
Bachelor of Science in Telecommunications Engineering Degree Requirements (125 hours)
I. Core Curriculum Requirements1: 42 hours
- Communication (6 hours)
- Social and Behavioral Sciences (15 hours)
- Humanities and Fine Arts (6 hours)
- Mathematics and Quantitative Reasoning (6 hours)
- Science (9 hours)
1 Curriculum Requirements can be fulfilled by other approved courses from accredited institutions of higher education. The courses listed in parentheses are recommended as the most efficient way to satisfy both Core Curriculum and Major Requirements at UT Dallas.
II. Major Requirements: 74 hours4
Major Preparatory Courses (22 hours beyond Core Curriculum)
- CHEM 1111 General Chemistry Laboratory I3
- CHEM 1311 General Chemistry I3
- ECS 1200 Introduction to Engineering and Computer Science
- CS 1337 Computer Science I
- TE 2305 Discrete Mathematics I
- CS 2336 Computer Science II
- TE 1202 Introduction to Electrical Engineering
- MATH 2417 Calculus I2
- MATH 2419 Calculus II2
- MATH 2420 Differential Equations with Applications
- PHYS 2125 Physics Laboratory I3
- PHYS 2126 Physics Laboratory II3
- PHYS 2325 Mechanics3
- PHYS 2326 Electromagnetism and Waves3
Major Core Courses (52 hours beyond Core Curriculum)
- CS 3340 Computer Architecture
- CS 4141 Digital Systems Laboratory
- CS 4341 Digital Logic and Computer Design
- ECS 3361 Social Issues and Ethics in Computer Science and Engineering5
- ECS 3390 Professional and Technical Communication5
- EE 3150 Communications Systems Laboratory
- ENGR 3300 Advanced Engineering Mathematics
- EE 3350 Communications Systems
- EE 4360 Digital Communications
- EE 4361 Introduction to Digital Signal Processing
- TE 3101 Electrical Network Analysis Laboratory
- TE 3102 Signals and Systems Laboratory
- TE 3301 Electrical Network Analysis
- TE 3302 Signals and Systems
- ENGR 3341 Probability Theory and Statistics
- TE 3345 Data Structures and Introduction to Algorithmic Analysis
- TE 4348 Operating Systems Concepts
- TE 4365 Introduction to Wireless Communication
- TE 4367 Telecommunication Networks
- TE 4388 Senior Design Project I
- TE 4389 Senior Design Project II
- TE 4390 Computer Networks
2 Six hours of Calculus are counted under Mathematics Core above, and two hours of Calculus are counted as Major Preparatory Courses.
3 One hour of General Chemistry I and General Chemistry I Laboratory is counted under Science core, and three hours are counted as Major Preparatory Courses.
4 Students must have passed each of the CS, Math, Science, EE and TE courses listed above, and each of their prerequisites, with a grade of C- or better.
5 Hours fulfill the communication component requirement of the Core Curriculum.
6 Hours contribute to the Social and Behavioral Sciences component of the Core Curriculum
III. Elective Requirements: 9 hours
Advanced Electives (6 hours) All students are required to take at least six hours of advanced electives outside their major field of study. These must be either upper-division classes or lower-division classes that have prerequisites. Four of these hours may be satisfied with MATH 2420 counted under Major Preparatory courses.
Free Electives (7 hours) Both lower-and upper division courses may count as free electives, but students must complete at least 51 hours of upper-division credit to qualify for graduation.
Degree programs in the Erik Jonsson School of Engineering and Computer Science are governed by various accreditation boards that place restrictions on classes used to meet the curricular requirements of degrees they certify. For this reason, not all classes offered by the University can be used to meet elective requirements. Please check with your academic advisor before enrolling in classes you hope to use as free electives.
Fast Track Baccalaureate/Master's Degrees
In response to the need for advanced education in electrical engineering, a Fast Track program is available to exceptionally well-qualified UT Dallas undergraduate students who meet the requirements for admission to the graduate school. The Fast Track program is designed to accelerate a student's education so that both a B.S.E.E. and an M.S.E.E. degree can be earned in five years of full-time study. This is accomplished by (1) taking courses (typically electives) during one or more summer semesters, and (2) beginning graduate course work during the senior year. Details of the requirements for admission to this program are available from the Associate Dean for Undergraduate Education.
The Telecommunications Engineering Program offers upper-division Honors for outstanding students in the B.S. Telecommunications Engineering degree program. This program offers special sections of designated classes and other activities designed to enhance the educational experience of exceptional students. Admission to the Honors programs requires a 3.50 GPA in at least 30 hours of coursework. Graduation with Honors requires a 3.50 or better GPA and completion of at least 6 honors classes. These honors classes must include either Senior Honors (TE 4399) or Undergraduate Research in Telecommunications Engineering (TE 4V98) and a Senior Honors Thesis must be completed within one of those two classes. (While the topics may be related, the Senior Thesis does not replace the need for the student to complete a regular Senior Design Project.) The other 5 honors classes can come from a mixture of Graduate level (up to a count of 4) classes and special honor sections of regular undergraduate TE classes (up to a count of 2). Current undergraduate honors courses include but are not limited to: TE 2310(H), TE 3350(H), TE 4399 and TE 4V98. Course grades in the 6 honor classes used to determine Honors status must be B- or higher to qualify.
Departmental Honors with Distinction may be awarded to students whose Senior Honors Thesis is judged by a faculty committee to be of exemplary quality. Only students graduating with Departmental Honors are eligible. Thesis/projects must be submitted by the deadline that applies to M.S. Theses in the graduating semester to allow for proper evaluation. Students interested in Honors with Distinction are encouraged to start working on their thesis/project a year prior to graduation.
The School of Engineering and Computer Science does not offer minors in Telecommunications Engineering at this time.
- CS 2336 Computer Science II