Journal Conference Miscellaneous


[2018]

      • Vahid Qaradaghi, A. Ramezany, S. Babu, JB Lee and S. Pourkamali, “Nanomechanical Disk Resonators as Highly Sensitive Mass Sensors,” IEEE Electron Device Letters 39, no. 11, pp. 1744-1747.
      • Jinpyo Jeon, Sang Kug Chung, JB Lee, Seok Joo Doo and Daeyoung Kim, “Acoustic wave-driven oxidized liquid metal-based energy harvester,” The European Physical Journal Applied Physics, vol. 81, no. 2, pp. 20902, April 2018.
        (nominated for ‘Highlight’ section of Europhysics News)

[2017]

      • Daeyoung Kim, Seok Joo Doo, Heong Sup Won, Woojin Lee, Jinpyo Jeon, Sang Kug Chung, Gil-Young Lee,Semyoung Oh and JB Lee, “On-demand frequency tunability of fluidic antenna implemented with gallium-based liquid metal alloy,” The European Physical Journal Applied Physics, vol. 78, no. 1, pp. 11101, April 2017.
      • Shantanu Shrikant Kadlaskar, Jun Hyeon Yoo, JB Lee and Wonjae Choi, “Cost-effective surface modification for Galinstan lyophobicity,” Journal of colloid and interface science, vol. 492, pp. 33-40, April 2017.
      • Jinpyo Jeon, JB Lee, Sang Kug Chung and Daeyoung Kim, “On-demand magnetic manipulation of liquid metal in microfluidic channels for electrical switching applications,” Lab on a Chip, vol. 17, no. 1, pp. 128-133, January 2017.

[2016]

      • J. P. Jeon, JB Lee, S. K. Chung, and Daeyoung Kim, “Magnetic liquid metal marble: characterization of lyophobicity and magnetic manipulation for switching applications,” IEEE Journal of Microelectromechanical systems, vol. 25, no. 6, pp. 1050-1057, Dec. 2016.
      • Tingge Xu, Jun Hyeon Yoo, Sachin Babu, Samit Roy, JB Lee and Hongbing Lu, “Characterization of the mechanical behavior of SU-8 at microscale by viscoelastic analysis,” Journal of Micromechanics and Microengineering, vol. 26, no. 10, pp.105001-1~12, August 2016.
      • Jae Ah Lee, Ali E. Aliev, Julia S. Bykova, Monica Jung de Andrade, Daeyoung Kim, Hyeon Jun Sim, Xavier Lepro, Anvar A. Zakhidov, JB Lee, Geoffrey M. Spinks, Siegmar Roth, Seon Jeong Kim and Ray H. Baughman, “Woven-Yarn Thermoelectric Textiles,” Advanced Materials, vol. 28, no. 25, pp. 5038-5044, April 2016.
      • Daeyoung Kim, Jun Hyeon Yoo and JB Lee, “Liquid metal-based reconfigurable and stretchable photolithography,”Journal of Micromechanics and Microengineering, vol. 26, no. 4, pp.045004-1~9, February 2016.

 

[2015]

      • Ning Xue, Leonidas Belris, and JB Lee, “One-step fabrication of three-dimensional PDMS peel-off micro-well array for cell trapping,” Journal of Micro/Nanolithography, MEMS, and MOEMS, vol. 14, no. 1, pp.014503-1~7, March 2015.
      • Daeyoung Kim, Yunho Lee, Dong-Weon Lee, Wonjae Choi, Koangki Yoo, and JB Lee, “Hydrochloric acid-impregnated paper for gallium-based liquid metal microfluidics,” Sensors and Actuators B: Chemical, vol. 207, pp. 199~205, February 2015.
      • Daeyoung Kim and JB Lee, “Magnetic-field-induced liquid metal droplet manipulation,” Journal of the Korean Physical Society, vol. 66, no. 2, pp. 282~286, January 2015.
      • JB Lee, Kyung-Hak Choi, Koangki Yoo, “Review: Innovative SU-8 lithography techniques and their applications,” Micromachines, vol. 6, no. 1, pp. 1-18, January 2015.

 

[2014]

      • Daeyoung Kim, Richard G. Pierce, Rashaunda Henderson, Seok Joo Doo, Koangki Yoo, and JB Lee, “Liquid metal actuation-based reversible frequency tunable monopole antenna,” Applied Physics Letters, vol. 105, n. 23, pp. 234104-1~4, December 2014.
      • Youngsam Yoon, Daeyoung Kim, and J.-B. Lee, “Review: Hierarchical micro/nano structures for artificial super-hydrophobic and super-lyophobic surfaces,” Springer Micro and Nano Syustems Letters, 2:3, September 2014
      • Arun Gupta, Lance Barron, Michael Brainin, and J.-B. Lee , “Reduction of out-of-plane warpage in surface micromachined beams using corrugation,” Journal of Micromechanics and Microengineering, vol. 24, no. 6, pp. 065023-1~7, June 2014.
      • Kyung-Hak Choi*, Jinwoo Huh*, Yonghao Cui, Krutarth Trivedi, Walter Hu, J.-B. Lee, and B. K. Ju, “One-step combined -nanolithography-and-photolithography for a 2D photonic crystal TM polarizer ,” Micromachines, vol. 5, issue 2, pp. 228~238, June 2014.
      • Daeyoung Kim, Daewoong Jung, Jun Hyeon Yoo, Yungho Lee, Wonjae Choi, Gil S. Lee, Koangki Yoo, and J.-B. Lee, “Stretchable and bendable carbon nanotube on PDMS super-lyophobic sheet for gallium-based liquid metal manipulation,” Journal of Micromechanics and Microengineering, Vol. 24, no. 5, pp. 055018-1~6, May 2014.
      • Kyung-Hak Choi, Venkata Ananth Tamma, Yonghao Cui, Wounjhang Park, and J.-B. Lee, “Air-suspended fast transient tunable silicon photonic crystal waveguide,” IEEE Photonics Technology Letters, vol. 26, no. 6, pp. 603-605, March, 2014.
      • G. Li, M. Parmar, Daeyoung Kim, J.-B. Lee, Dong-Weon Lee, “PDMS Based Coplanar Microfluidic Channels for the Surface Reduction of oxidized Galinstan,” Lab on a Chip, vol. 14, issue 1, pp. 200 – 209, January 2014.

 

[2013]

      • Youngsam Yoon, Gil S. Lee, Koangki Yoo, and J.-B. Lee, “Fabrication of a microneedle/CNT hierarchical micro/nano surface electrochemical sensor and its in-vitro glucose sensing characterization,” Sensors, vol. 13, issue 12, pp. 16672-16681, December 2013
      • Daeyoung Kim, Dong-Weon Lee, Wonjae Choi, and J.-B. Lee, “A Super-Lyophobic 3D PDMS Channel as a Novel Microfluidic Platform to Manipulate Oxidized Galinstan,” IEEE/ASME Journal of Microelectromechanical Systems, vol. 22, no. 6, pp. 1267~1275, December 2013.
      • Youngsam Yoon, Dong-Weon Lee, and J.-B. Lee, “Under-exposure under-baking photo-lithography for super-hydrophobic optically-transparent polymeric artificial lotus leaf film,” IEEE/ASME Journal of Microelectromechnical Systems, vol.22, no.5, pp.1073~1080, October 2013.
      • Arun Gupta, Mark Fletcher, and J.-B. Lee, “A High Dynamic Restoring Force Electrostatic Actuator,” IEEE/ASME Journal of Microelectromechanical Systems, vol.22, no.5,pp.1032~1040, October 2013.
      • Sung-Hoon Cho, Ning Xue, Lawrence Cauller, Will Rosellini, and J.-B. Lee, “A MEMS-based fully-integrated wireless neurostimulator,” IEEE/ASME Journal of Microelectromechanical Systems, vol. 22, no. 1, pp. 170~176, February 2013.
      • Daeyoung Kim, Peter Thissen, Gloria Viner, Dong-Weon Lee, Wonjae Choi, Yves J. Chabal, Jeong-Bong Lee, “Recovery of Nonwetting Characteristics by Surface Modification of Gallium-Based Liquid Metal Droplets Using Hydrochloric Acid Vapor”, ACS Applied Materials & Interfaces, vol. 5, pp. 179~185, January 2013.

 

[2012]

      • Ning Xue, Sung Pil Chang and J.-B. Lee, “A SU-8-Based Microfabricated Implantable Inductively Coupled Passive RF Wireless Intraocular Pressure Sensor,” IEEE/ASME Journal of Microelectromechanical Systems, Vol. 21, No. 6, pp. 1338-1346, December 2012.
      • Steven Foland, Benjamin Swedlove, Hoang Nguyen, and J.-B. Lee, “One-dimensional nano grating-based guided-mode resonance pressure sensor,” IEEE/ASME Journal of Microelectromechanical Systems, Vol. 21, No. 5, pp. 1117-1123, October 2012.
      • Ning Xue,Sung-Hoon Cho, Sung-Pil Chang, and J.-B. Lee, “Systematical analysis and experiment of inductive coupling and induced voltage for inductively coupled wireless implanatable neurostimulator application,”Journalof Micromechanics and Microengineering , vol. 22, no. 7,pp. 0750008-1~10, July 2012.
      • Youngsam Yoon, Dong-Weon Lee and J.-B. Lee, “Surface modified nano-patterned SU-8 pillar array optically transparent super-hydrophobic thin film,” Journal of Micromechanics and Microengineering, vol. 22, no. 3, pp.035012-1~7, March 2012.

 

[2011]

      • Krishnamurthy Nemani, Joonbum Kwon, Krutarth Trivedi, Walter Hu, J.-B. Lee, and Barjor Gimi, “Biofriendly bonding processes for nanoporous implantable SU-8 microcapsules for encapsulated cell therapy,” Journal of Microencapsulation, vol. 28, n. 8, pp. 771~782, Dec. 2011.

 

[2010]

      • R. Dussart, L. J. Overzet, P. Lefaucheux, T. Dufour, M. Kulsreshath, M. A. Mandra, T. Tillocher, O. Aubry, S. Dozias, P. Ranson, J.-B. Lee, M. Goeckner, “Integrated micro-plasmas in silicon operating in helium”, European Physical Journal D, v. 60, n. 3, pp. 601~608, Dec. 2010.
      • Yonghao Cui, V. A. Tamma, Won Park, and J.-B. Lee, “Mechanically tunable negative-index photonic crystal lens”, IEEE Photonics Journal, v. 2, n. 6, pp. 1003~1012, Dec. 2010.
      • Steven Foland, Kyung-Hak Choi, and J.-B. Lee, “Pressure-tunable guided-mode resonant sensor for single wave characterization”, Optics Letters, v. 35, n. 23, pp. 3871~3873, Dec. 2010.
      • Yonghao Cui, Ke Liu, Duncan MacFarlane, and J.-B. Lee, “Thermo-optically tunable silicon photonic crystal light modulator”, Optics Letters, v. 35, n. 21, pp. 3613~3615, Nov. 2010.
      • Sung-Hoon Cho, Sanghee Son, Hoonju Chung, and J.-B. Lee, “A wireless powered fully integrated SU-8-based implantable LC transponder”, Microsystem Technologies, v. 16, n. 8-9, pp. 1657~1663, August 2010.
      • Daniel Park, Arun Nallani, Dongkyu Cha, Gil-Sik Lee, Moon J. Kim, George Skidmore, J.-B. Lee, and Jeong-Soo Lee, “A Sub-Micron Metallic Electrothermal Gripper”, Microsystem Technologies, v. 16, n. 3, pp. 367~373, March 2010.
      • Yong-Jun Shin and J.-B. Lee, “Machine vision for digital microfluidics”, Review of Scientific Instruments, v. 81, n. 1, 014302-1~7, January 2010. (Selected for the February 1, 2010 issue of Virtual Journal of Biological Physics Research, Listed as one of the Top 20 most downloaded articles in Feb. 2010)
      • Yonghao Cui, Ke Liu, Steven Foland, Kyung-Hak Choi, Mark Tinker, Duncan MacFarlane, and J.-B. Lee, “Silicon-based thermo-optically tunable photonic crystal lens”, IEEE Photonics Technology Letters, v. 22, n. 1, pp. 21~23, January 2010. (Featured on the research highlights section in Feb. 2010 issue of Nature Photonics).

 

[2009]

      • Barjor Gimi, Joonbum Kwon, Li Liu, Yang Su, Krishnarmurthy Nemani, Behroze, Krutarth Trivedi, Yonghao Cui, Behroze Vachha, Ralph Mason, Walter Hu, and J.-B. Lee, “Cell encapsulation and oxygenation in nanoporous microcontainers”, Biomedical Microdevices, v. 11, n. 6, pp. 1205~1212, December 2009.
      • Joonbum Kwon, Krutarth Trivedi, Walter Hu, J.-B. Lee, Krishnamurthy Nemani, and Barjor Gimi, “SU-8-based immunoisolative microcontainer with nanoslots defined by nanoimprint lithography”, Journal of Vacuum Science and Technology B, v. 27, n. 6, pp. 2795~2800, Nov./Dec. 2009.
      • Mark Tinker, Yonghao Cui, and J.-B. Lee, “Feasibility assessment and analysis of a forward injected photonic crystal device”, IEEE Transactions on Nanotechnology, v. 8, n. 3, pp. 391~401, May 2009.
      • Barjor Gimi, Joonbum Kwon, Andrey Kuznetsov, Behroze Vachha, Richard L. Magin, Louis H. Philipson, J.-B. Lee, “A Nanoporous, Transparent Microcontainer for Encapsulated Islet Therapy”, Journal of Diabetes Science and Technology, v. 3, n. 2, pp. 297~303, March 2009.

 

[2008]

      • Brandon Pillans, Frank Morris, Prem Chahal, Gary Frazier, and J-B. Lee, “Schottky contact-based RF MEMS switch”, IEEE Journal of Microelectromechanical Systems, v. 17, n. 6, pp. 1439~1446, December 2008.
      • Heung-Shik Lee, Sung-Hoon Cho, JB Lee, Chongdu Cho,”Numerical Modeling and Characterization of Micromachined Flexible Magnetostrictive Thin Film Actuator”, IEEE Transactions on Magnetics, v. 44, n. 11,pp. 3209~3212, November 2008.
      • Sung-Hoon Cho, Hong Lu, Larry Cauller, Mario Romero-Ortega, JB Lee, “biocompatible SU-8-Based Microprobes for Recording Neural Spike Signals from Regenerated Peripheral Nerve Fibers”, IEEE Sensors Journal, v. 8, n. 11, pp. 1830~1836, November 2008.
      • Karthik Colinjivadi, J-B. Lee and Rocky Draper, “Viable cell handling with high aspect ratio polymer chopstick ripper mounted on a nano precision manipulator”, Microsystem Technologies, v. 14, n. 9~11, pp. 1627~1633, October 2008.
      • Karthik Colinjivadi, Yonghao Cui, Matt Ellis, George Skidmore, and J-B. Lee, “De-Tethering of high aspect ratio metallic and polymeric MEMS/NEMS parts for the direct pick-and-place assembly of 3D microsystem”, Micro system Technologies, v. 14, n. 9-11, pp. 1621~1626, October 2008.
      • Daniel Park, Youngkyun Jeong, J-B. Lee, and Sungyong Jung,”Chip-level integration of RF MEMS on-chip inductors using UV-LIGA technique”,Microsystem Technologies, v. 14, n. 9-11, pp. 1429~1438, October 2008.
      • T. Dufour, R. Dussart, P. Lefaucheux, P. Ranson, M. Mandra, J.-B. Lee, M. Goeckner, L. J. Overzet,”Effect of limiting the cathode surface on direct current M.H.C.D. in He”, Applied Physics Letters, v. 93, n. 7, pp. 071508-1~3, August 2008.
      • Yonghao Cui, Qi Wu, E. Schonbrun, Mark Tinker, J-B. Lee, and W. Park, “silicon-based 2D slab photonic crystal TM polarizer in telecommunication wavelength”, IEEE Photonics Technology Letters, vol. 20, no. 8, pp.641~643, April 15, 2008.
      • Daniel Park, M. Hupert, M. Witek, B. H. You, P. Datta, J. Guy, J.-B. Lee, S. A. Soper, D. E. Nikitopoulos, and M. C. Murphy, “A Titer Plate-Based Polymer Microfluidic Platform for High Throughput Nucleic Acid Purification”, Biomedical Microdevices, v. 10, n. 1, pp. 21~33, February 2008.

 

[2007]

      • Hong Lu, Chuck Goldsmith, Laurence Cauller, and J-B. Lee, “MEMS-based inductively coupled RFID transponder for implantable wireless sensor applications”, IEEE Transactions on Magnetics, vol. 43, no. 6, pp. 2412~2414, June 2007.
      • Anh-Tuan Le, Wan-Shik Cho, Yong-Seok Kim, J.-B. Lee, Chong-Oh Kim, Heebok Lee, “A micro-LC-resonator fabricated by MEMS technique for high-frequency sensor applications,” Sensors and Actuators A: Physical, vol. 135, issue: 2, pp. 547~551, April 2007
      • Hong Lu, Brandon Pillans, Jong-Chan Lee, Kyunghwan Kim, and J-B. Lee, “High aspect ratio air core solenoidinductors using an improved UV-LIGA process with contrast enhancement material”, Microsystem Technologies,vol. 13, no. 3~4, pp. 237~243, February 2007.
      • Kabseog Kim and J-B. Lee, “High aspect ratio tapered hollow metallic microneedle arrays with microfluidic interconnector”, Microsystem Technologies, vol. 13, no. 3~4, pp. 231~235, February 2007.

 

[2006]

      • Yong-Seok Kim, Seong-Cho Yu, Hong Lu, J-B. Lee, and Heebok Lee, “A new class of LC-resonator for micro magnetic sensor application”, Journal of Magnetism and Magnetic Materials, vol. 304, issue 1, pp. 117~121,September 2006.
      • Yong-Seok Kim, Seong-Cho Yu, Hong Lu, J-B. Lee, and Heebok Lee, “A class of micromachined magnetic resonator for high-frequency magnetic sensor application”, Journal of Applied Physics, vol. 99, no. 8, pp. 08B309-1 ~ 08B309-3, April 2006.
      • M. Tinker, E. Schonbrun, J-B. Lee, and W. Park, “Process integration and development of inverted photonic crystal arrays”,Journal of Vacuum Science and Technology B, vol. 24, no. 2, pp. 705~709, Mar/Apr 2006 (Selected for the March 20, 2006 issue of Virtual Journal of Nanoscale Science & Technology).
      • A. Nallani, T. Chen, D. Hayes, W. Che, and J-B. Lee, “A Method for improved VCSEL packaging using MEMS and ink jet technologies”, IEEE/OSA Journal of Lightwave Technology, vol. 24, no. 3, pp. 1504~1512, March 2006.

 

[2005]

      • Mark Tinker and J-B. Lee, “Thermal and optical simulation of a photonic crystal light modulator based on the thermo-optic shift of the cut-off frequency”, Optics Express, vol. 13, no. 18, pp. 7174~7188, September 2005.
      • E. Schonbrun, Mark Tinker, W. Park, and J-B. Lee, “Negative refraction in 2D slab Si/polymer photonic crystal”, IEEE Photonics Technology Letter, vol. 17, no. 6, pp. 1196~1198, June 2005.
      • Mark Tinker and J-B. Lee, “Thermo-optic photonic crystal light modulator”, Applied Physics Letters vol. 86, no.22, pp. 221111-1~3, May 30, 2005 (selected for the publication in June 13, 2005 issue of Virtual Journal of Nanoscale Science &Technology).
      • Jeongsoo Lee, Daniel S. Park, Arun Nallani, Gil Lee, and J-B. Lee, “Sub-micron metallic electrothermal actuators”,Journal of Micromechanics and Microengineering vol. 15, no. 2, pp. 322~327, February 2005.

 

[2004]

      • Kabseog Kim, Erik Nilsen, Trent Huang, Andrew Kim, Matt Ellis, George Skidmore, J-B. Lee, “Metallic microgripper with SU-8 adaptor as end-effectors for heterogeneous micro/nano assembly applications”, Microsystem Technologies, vol.10, no.10, pp.689~693, December 2004.
      • W. Park and J-B. Lee, “Mechanically tunable photonic crystal structure”, Applied Physics Letters, vol. 85, no. 21, pp. 4845~4847, November 22, 2004. (work featured on the cover page of APL).
      • Kabseog Kim, Daniel S. Park, Hong Lu, W. Che, Kyung Kim, J-B. Lee, and Chong H. Ahn, “A tapered hollow metallic microneedle array using backside exposure of SU-8”, Journal of Micromechanics and Microengineering,vol. 14, no. 4, pp. 597~603, April 2004.
      • Daniel S. Park, K. Kim, B. Pillans, and J-B. Lee, “PDMS-based pattern transfer process for the post-IC integration of MEMS onto CMOS chips”, Journal of Micromechanics and Microengineering, vol. 14, no. 3, pp. 335~340, March 2004.
      • C. Ahn, J. Choi, G. Beaucage, J. Nevin, J-B. Lee, A. Puntambekar and J-Y. Lee, “Disposable smart lab-on-a-chip for point- of-care clinical diagnostics”, Proceedings of the IEEE, vol. 92, no. 1, pp. 154~173 , January 2004 (invited).

 

[2003]

      • N. Chomnawang, J-B. Lee, and W. A. Davis, “Surface micromachined arch-shape 3D solenoid inductors for high frequency applications”, SPIE Journal of Microlithography, Microfabrication, and Microsystems, vol. 2, no. 4,pp. 275~281, October 2003.
      • D. S. Kercher, J-B. Lee, O. Brand, and M. G. Allen, “Microjet Cooling Devices for Thermal Management of Electronics”, IEEE Transactions on Components and Packaging Technology, vol. 26, no. 2, pp. 359~366, June 2003.

 

[2002]

      • J-B. Lee, “A 32 by 32 electroplated metallic micromirror array”, Journal of Semiconductor Technology and Science, vol. 2, no.4, pp. 288~294, December 2002.
      • Kabseog Kim, Sang Won Park, J-B. Lee, Harish Manohara, Yohanes Desta, Michael Murphy, and Chong H. Ahn, “Rapid replication of polymeric and metallic high aspect ratio microstructures using PDMS and LIGA technology”, Microsystem Technologies, vol. 9, no. 1-2, pp. 5~10, November 2002.
      • S. P. Chang, J-B. Lee, and M. G. Allen, “Robust capacitive pressure sensor array”, Sensors and Actuators, A: Physical, vol. 101, no. 1-2, pp. 231~238, September 2002.

 

[1995-1997]

      • J-B. Lee, J. English, C. H. Ahn, and M. G. Allen, “Planarization techniques for vertically integrated metallic MEMS on silicon foundry circuits”, Journal of Micromechanics and Microengineering, vol. 7, no. 2, pp. 44~54, June 1997.
      • J-B. Lee, M. G. Allen, T. C. Hodge, S. A. Bidstrup, and P. A. Kohl, “Modeling of substrate-induced anisotropy in through-plane thermal behavior of polymeric thin films”, Journal of Polymer Science : Part B. Polymer Physics, vol.34, no. 9, pp. 1591~1596, July 1996.
      • J-B. Lee, Z. Chen, M. G. Allen, A. Rohatgi, and R. Arya, “A miniaturized high voltage solar cell array as an electrostatic MEMS power supply”, IEEE Journal of Microelectromechanical Systems, vol. 4, no. 3, pp. 102~108, September 1995.

 

 

Conference Proceedings and Presentations


[2019]

      • J. Jeong, J. Seo, JB Lee, Sang Kug Chung, Daeyoung Kim, “Reversible on-demand magnetic liquid metal marble manipulation by magnettowetting: split and merge, deformation and recovery,” The 32nd IEEE International Conference on Micro Electro Mechanical Systems (MEMS 2019), Seoul, Korea, January 2019.
      • Z. Chen and JB Lee, “Gallium oxide coated flat surface as non-wetting surface for actuation of liquid metal droplets,” The 32nd IEEE International Conference on Micro Electro Mechanical Systems (MEMS 2019), Seoul, Korea, January 2019.

[2018]

      • JB Lee, “Highly compliant guided-mode resonance 1D and 2D gratings for sensing applications,” The 19th International Symposium on the Physics of Semiconductors and Applications (ISPSA 2018), Jeju, Korea, July 2018 (Invited).
      • JB Lee, “MEMS-enabled tunable nanophotonics,” The International Symposium on Optoelectronic and Technology and Application, Beijing, China, May 2018 (invited).
      • Daeyoung Kim and JB Lee, “Liquid metal microfluidics and its applications,” The 13th Annual IEEE International Conference on Nano/Micro Engineered and Molecular Systems (NEMS 2018), Singapore, April 2018 (invited).
      • J. Seo, JB Lee, Sang Kug Chung, Daeyoung Kim, “Magnetically-induced various recovable deformation of magnetic liquid metal marble,” The 31st IEEE International Conference on Micro Electro Mechanical Systems (MEMS 2018), Belfast, Northern Ireland, January 2018. (oral)

[2017]

      • Ramezany, S. Babu, V. Kumar, JB Lee, and S. Pourkamali, “Resonant piezoresistive amplifiers: towards single element nano-mechanical RF front ends,” The 30th IEEE International Conference on Micro Electro Mechanical Systems (MEMS 2017), Las Vegas, NV, USA, January 2017. (oral)

[2015]

      • Jun Hyeon Yoo and JB Lee, “Flexible optically transparent PDMS nanograss non-wetting superlyophobic surface for liquid metal manipulation,” The 19th International Conference on Miniaturized Systems for Chemistry and Life Sciences (Micro TAS 2015), Gyeongju, Korea, Oct. 2015.
      • J. P. Jeon, Jeong Bong (JB) Lee, S. K. Chung, and Daeyoung Kim, “Magnetic liquid metal marble: wireless manipulation of liquid metal droplet for electrical switching applications,” The 18th International Conference on Solid-State Sensors, Actuators & Microsystems (Transducers 2015), pp. 1834~1837, Anchorage, Alaska, June 2015.
      • G. D. Earle, C. Orr, R. L. Davidson, Jeong Bong (JB) Lee, Jun Hyeon Yoo, T. Beach, O. Clavier, and C. Holland, “Neutral pressure and wind measurement technologies to address thermospheric science objectives,” 2015 Conference on Measurement Techniques for Solar and Space Physics, Boulder, Colorado, April 2015. (Invited).
      • Joonbum Kwon and JB Lee, “Magnetically-assembled immunoisolative polymeric cell transplantation,” 2015 IEEE International Conference on Industrial Technology (ICIT 2015), pp. 3351-3355, Seville, Spain, March 2015.

 

[2014]

      • Jun Hyeon Yoo*, Daeyoung Kim*, Wonjae Choi, Koangki Yoo, and JB Lee, “Dimensional limitation of polymeric microfluidic platform for liquid metal manipulation,” The 40th Annual Conference of the IEEE Industrial Electronics Society (IECON 2014), pp. 967~970, Dallas, TX, USA, October 29 ~ November 1, 2014.
      • Jeong-Bong Lee, Daeyoung Kim, Koangki Yoo, and Dong-Weon Lee, “Microfluidic platforms for gallium-based liquid metal, ” The 5th Japan-China-Korea MEMS/NEMS Conference, Seoul, Korea, July 3, 2014 ( Invited )
      • Jeong-Bong Lee, Kyung-Hak Choi, Yonghao Cui, Steven Foland, and Koangki Yoo, “MEMS-enabled tunable nanophotonics, ” The 7th Asia Pacific Conference on Transducers and Micro/Nano Technologies (APCOT 2014), Daegu, Korea, June 29 ~ July 2, 2014 ( Invited )
      • Daeyoung Kim, Jun Hyeon Yoo, Yunho Lee, Wonjae Choi, Koangki Yoo and Jeong-Bong Lee, “Gallium-based liquid metal inkjet printing,” The 27th IEEE International Conference on Micro Electro Mechanical Systems (MEMS 2014), pp. 967~970, San Francisco, CA, USA, January 2014.
      • Daeyoung Kim, Jun Hyeon Yoo, Wonjae Choi, Koangki Yoo and Jeong-Bong Lee, “Real-time dynamically reconfigurable liquid metal based photolithography,” The 27th IEEE International Conference on Micro Electro Mechanical Systems (MEMS 2014), pp. 540~543, San Francisco, CA, USA, January 2014.

 

[2013]

      • Daeyoung Kim, Yunho Lee, Dong-Weon Lee, Wonjae Choi, and J.-B. Lee, “Hydrochloric acid impregnated paper for liquid metal microfluidics,” The 17th International Conference on Solid-Stated Sensors, Actuators & Microsystems (Transducers 2013), pp. 2620~2623, Barcelona, Spain, June 2013. (oral presentation)
      • Youngsam Yoon, Koangki Yoo and JB Lee, “A hierarchical high aspect ratio micro/nano combined structures for enhanced electrochemical sensing,” The 10th International Workshop on High Aspect Ratio Micro and Nano System Technology (HARMNST 2013), Berlin, Germany, April, 2013.
      • Steven Foland and J.-B. Lee, “A highly-compliant asymmetric 2D guided-mode resonance sensor for simultaneous measurement of dual-axis strain,” The 26th IEEE International Conference on Micro Electro Mechanical Systems (MEMS 2013), pp. 665~668, Taipei, Taiwan, January 2013.

 

[2012]

      • Arun Gupta, Mark Fletcher, Divyanshu Agrawal, Carol McMillen, J.-B. Lee, “A high dynamic restoring force actuator,”Hilton Head Workshop 2012: A Solid-State Sensors, Actuators and Microsystems Workshop, Hilton Head Island, SC, June 2012.
      • Daeyoung Kim, Dong-Weon Lee, Wonjae Choi, and J.-B. Lee, “A super-lyophobic PDMS micro-tunnel as a novel microfluidic platform for oxidized Galinstan,” The 25th IEEE International Conference on Micro Electro Mechanical Systems (MEMS 2012), pp. 1005~1008, Paris, France, January 2012
      • Youngsam Yoon, Dong-Weon Lee, Jun-Hyung Ahn, Joon Sohn, and J.-B. Lee, “One-step fabrication of optically transparent PDMS artificial lotus leaf film using under-exposed under-baked photoresist mold,” The 25th IEEE International Conference on Micro Electro Mechanical Systems (MEMS 2012), pp. 301~304, Paris, France, January 2012.
      • J.-B. Lee, “MEMS-based implantable biomedical microdevices,” IEEE Circuits and Systems for Medical and Environmental Applications, Merida, Yucatan, Mexico, January 2012 (Keynote speaker).

 

[2011]

      • Ning Xue, Sung Pil Chang, Steven Foland and J.-B. Lee, “Biocompatible polymeric wireless pressure sensor for intraocular pressure sensing application,” The 10th IEEE Conference on Sensors (IEEE Sensors 2011), Limerick, Ireland, October 2011.
      • Steven Foland and J.-B. Lee, “High-sensitivity microfluidic pressure sensor using a membrane-embedded resonant optical grating,” The 10th IEEE Conference on Sensors (IEEE Sensors 2011), Limerick, Ireland, October 2011.
      • Steven Foland, Ke Liu, Kyung-Hak Choi, Duncan MacFarlane, and J.-B. Lee, “A PDMS-based pressure-tunable nanograting,” The 11th International Conference on Nanotechnsology (IEEE Nano 2011), Portland, Oregon, August 2011.
      • Youngsam Yoon, Dong-Weon Lee and J.-B. Lee, “Super-hydrophobicity of a transparent thin film with nano-patterned polymer needle array,” The 11th International Conference on Nanotechnology (IEEE Nano 2011), Portland, Oregon, August 2011.
      • J.-B. Lee, “MEMS-based implantable RF wireless neurostimulators,” The 33rd International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC 2011), Boston, MA, August 2011 (Invited speaker).
      • Ning Xue, Sung Pil Chang, and J.-B. Lee, “A SU-8-based compact implantable wireless pressure sensor for intraocular pressure sensing application,” The 33rd International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC 2011), Boston, MA, August 2011 (one of the 15 finalists in the student paper competition).
      • Youngsam Yoon, Jae-Hak Kim, Han-Jung Song, Koangki Yoo, Gil Lee, and J.-B. Lee, “A novel microneedle-based non-enzymatic glucose sensor for painless diabetes testing application”, The 16th International Conference on Solid-State Sensors, Actuators & Microsystems (Transducers 2011), Beijing, China, June 2011.
      • Kyung-Hak Choi, Jinwoo Huh, B. K. Ju, Walter Hu, and J.-B. Lee, “2D photonic crystal TM polarizer fabricated by one-step combined nanoimprint and photolithography”, The 16th International Conference on Solid-State Sensors, Actuators & Microsystems (Transducers 2011), Beijing, China, June 2011.
      • Kyung-Hak Choi, Yonghao Cui, Ke Liu, Duncan MacFarlane, and J.-B. Lee, “Ultra-compact electro-thermally tunable photonic crystal prism for on-chip optical router application”, The 16th International Conference on Solid-State Sensors, Actuators & Microsystems (Transducers 2011), Beijing, China, June 2011.
      • Youngsam Yoon, Jae-Hak Kim, Han-Jung Song, Koangki Yoo, Gil Lee, and J.-B. Lee,”Microneedle integrated carbon nanotube sheet electrode-based non-enzymatic glucose sensor for painless diabetes testing application”, The 27th Southern Biomedical Engineering Conference, Arlington, TX, April 2010.
      • Yonghao Cui, V. A. Tamma, Won Park, and J.-B. Lee, “MEMS-enabled mechanically-tunable 2D photonic crystal lens”, The 24th IEEE International Conference on Micro Electro Mechanical Systems (MEMS 2011), Cancun, Mexico, January 2011.

 

[2010]

      • R. Dussart, M. Kulsreshath, T. Dufour, L. Overzet, P. Lefaucheux, T. Tillocher, O. Aubry, S. Dozias, P. Ranson, M. Goeckner, J.-B. Lee, “Ignition and excitation of a micro hollow cathode discharge operating in DC regime”, AVS 57th International Symposium and Exhibition. Albuquerque, NM, October 2010.
      • M. Kulsreshath, T. Dufour, P. Lefaucheux, O. Aubry, S. Dozias, P. Ranson, J.-B. Lee, M. Goeckner, L. Overzet, R. Dussart, ” Micro discharge plasma using silicon platform”, AVS 57th International Symposium and Exhibition. Albuquerque, NM, October 2010.
      • Yonghao Cui, V. A. Tamma, J.-B. Lee, and Won Park, “MEMS-enabled mechanically tunable photonic crystal lens”, The SPIE 2010, San Diego, CA, August 2010 (oral presentation).
      • Yonghao Cui, V. A. Tamma, J.-B. Lee, and Won Park, “MEMS-Enabled Mechanically Tunable Negative-Index Photonic Crystal Lens”, The International Conference on Nanophotonics, Tsukuba, Japan, May 2010 (oral presentation).
      • Kyung-Hak Choi*, Jinwoo Huh*, Yonghao Cui, Byeongkweon Ju, Walter Hu, and J.-B. Lee, “Massive replication of nanophotonic crystals using combined-nanoimprint-and-photolithography”, The 54th International Conference on Electron, Ion, and Photon Beam Technology and Nanofabrication (EIPBN 2010), Anchorage, AK, May 2009. (* equal contribution two first authors, oral presentation)
      • Yonghao Cui, Ke Liu, Duncan MacFarlane, and J.-B. Lee, “Thermo-optically tunable photonic crystal light modulator utilizing cut-off effect”, The 2010 IEEE Conference on Lasers and Electro-Optics (CLEO 2010), San Jose, CA, May 2010 (oral presentation).
      • R. Dussart, T. Dufour, T. Tillocher, M. Kulsreshath, O. Aubry, S. Dozias, P. Lefaucheux, J.-B. Lee, M. Goeckner, P. Ranson, N. Sadeshi, L. Overzet, “Study of an MHCD operating in He using optical and electrical diagnostics”, International Workshop on the Diagnostics of Micro Plasmas, Bochum, Germany, March 2010.
      • Yonghao Cui, Ke Liu, Steven Foland, Kyung-Hak Choi, Mark Tinker, Duncan MacFarlane, and J.-B. Lee, “Electro-thermally tunable silicon photonic crystal lens”, Technical Digest, The 23rd IEEE International Conference on Micro Electro Mechanical Systems (MEMS 2010), Hong Kong, January 24-28, 2010, pp. 188-191. (single session oral presentation, less than 3% acceptance rate)
      • Sung-Hoon Cho, Larry Cauller, Will Rosellini, and J.-B. Lee, “A MEMS-based fully-integrated wireless neurostimulator”, Technical Digest, The 23rd IEEE International Conference on Micro Electro Mechanical Systems (MEMS 2010), Hong Kong, January 24-28, 2010, pp. 300-303. (dual session oral presentation, less than 8.5% acceptance rate)

 

[2009]

      • Joonbum Kwon, Krutarth Trivedi, Walter Hu, Andrey Kuznetsov, Louis Philipson, J.-B. Lee, and Barjor Gimi, “Immnoisolative nanoporous microcontainer for cell transplantation application”, The 13th International Conference on Miniaturized Systems for Chemistry and Life Sciences (MicroTAS 2009), Jeju Island, Korea, November 2009.
      • Sung-Hoon Cho and J.-B. Lee,”A fully integrated RF LC transponder platform for implantable wireless sensor applications”, the 8th IEEE Conference on Sensors, Christchurch, New Zealand, October 2009.
      • Barjor Gimi Joonbum Kwon, Krutarth Trivedi, Walter Hu, and J.-B. Lee, “Nanoimprinted, magnetically assembled microcontainers for cell therapy”, The 17th International Conference on Bioencapsulation, Groningen, The Netherlands,September 2009.
      • Joonbum Kwon, Yonghao Cui, Sung-Hoon Cho, Krutarth Trivedi, J.-B. Lee, Walter Hu, and Barjor Gimi, “A novel SU-8-based high aspect ratio microcontainer for cell encapsulation and cell based therapy”, The 8th International Workshop on High Aspect Ratio Microstructure Technology (HARMST 2009), Saskatoon, Canada, June 2009.
      • Sung-Hoon Cho and J.-B. Lee, “A wireless powered fully integrated SU-8-based implantable LC transponder”, The 8th International Workshop on High Aspect Ratio Microstructure Technology (HARMST 2009), Saskatoon, Canada, June 2009.
      • T. Dufour, R. Dussart, L. J. Overzet, M. Mandra, J.-B. Lee, M. Goeckner, P. Lefaucheux, and P. Ranson, “Ignition and characterization of Micro Hollow Cathode Discharges in Helium”, The 17th International Colloquium on Plasma Processes, Marseille, France, June 2009.
      • Yonghao Cui, Qi Wu, Won Park, Jangbae Jeon, Moon Kim, and J.-B. Lee, “MEMS-BASED MECHANICALLY TUNABLE FLEXIBLE PHOTONIC CRYSTAL”, The 15th International Conference on Solid-State Sensors, Actuators & Microsystems (Transducers 2009), pp. 509-512, Denver, CO, June 2009.
      • Joonbum Kwon, Krutarth Trivedi, Walter Hu, J.-B. Lee, and Barjor Gimi, “Novel immunoisolative microcontainer with nanoslots defined by nano imprint lithography”, The 53rd International Conference on Electron, Ion, and Photon Beam Technology and Nanofabrication (EIPBN 2009), Marco Island, FL, May 2009.
      • Kyung-Hak Choi and J.-B. Lee, “Constant-Charge Biasing Integrated Circuit for Capacitive RF MEMS switch”, SPIE Microtechnologies for the New Millennium Conference, Dresden, Germany, May 2009.
      • Joonbum Kwon, Yang Su, Li Liu, Ralph Mason, Krutarh Trivedi, Walter Hu, J.-B. Lee, Barjor Gimi, “Detection of hypoxia response of engineered 9L glioma cells that were encapsulated in nanoporous microcontainers fabricated with electron-beam lithography”, The 100th Annual Meeting of American Association for Cancer Research, Denver, CO, April, 2009.
      • Yong-Jun Shin, Mehrdad Nourani, Rockford Draper, and J.-B. Lee, “Using a Finite State Machine for Gene Transcription Network Modeling”, The 1st International Conference on Bioinformatics and Computational Biology (BICoB 2009), New Orleans, LA, April 2009.

 

[2008]

      • Yong-Jun Shin and J.-B. Lee, “Digital microfluidics-based high throughput imaging for systems biology”, The 7th IEEE Conference on Sensors, Lecce, Italy, October 2008.
      • Yonghao Cui and J.-B. Lee, “2D Slab Silicon Photonic Crystal for Enhancement of Light Emission in Visible Wavelengths”, The 8th International Meeting on Information Display, Seoul, Korea, October 2008.
      • Lawrence Cauller and J.-B. Lee, “In vivo Tests of Switched-Capacitor Neural Stimulation for Use in Minimally-Invasive Wireless Implants”, The 30th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC 2008), Vancouver, Canada, August 2008.
      • Yong-Jun Shin and J.-B. Lee, “Digital Microfluidics as a Novel Platform for Systems Biology”, The 9th International Conference on Systems Biology (ICSB 2008), Goteberg, Sweden, August 2008.
      • Yonghao Cui, Qi Wu, Mark Tinker, J.-B. Lee, and Won Park, “Silicon-based 2D Slab Nano Photonic Crystal Thermo-Optic Light Modulator”, IEEE 8th International Conference on Nanotechnology, Arlington, TX, August 2008.
      • Barjor Gimi, Joonbum Kwon, Li Liu, Behroze, J.-B. Lee, “Transparent Immunoisolative Microcontainers for Xenotransplantation”, The 22nd International Congress of The Transplantation Society, Sydney, Australia, August 2008.
      • Kyung-Hak Choi, J.-B. Lee, Chuck Goldsmith, “Simulation of Constant-Charge Biasing Integrated Circuit for High Reliability Capacitive RF MEMS Switch”, The 11th International Conference on Modelling and Simulation of Microsystems, Boston, MA, June 2008.
      • Jangbae Jeon, J.-B. Lee, and Moon Kim, “A 20 um Moveable Micro Formula-one”, The Nanotechnology Conference, Boston, MA, June 2008.
      • Heung-Shik Lee, Sung-Hoon Cho, J.-B. Lee, and Chongdu Cho, “Numerical Modeling and Characterization of Micromachined Flexible Magnetostrictive Thin Film Actuator”, IEEE International Magnetics Conference, Madrid, Spain, May 2008.
      • Barjor Gimi, J.-B. Lee, Joonbum Kwon, Venu, Paul, and Zaver, “Transparent nanoliter container supports cell delivery and imaging of post-transplant cell”, The 99th Annual Meeting of American Association for Cancer Research, San Diego, CA, April 2008.

 

[2007]

      • M. Mandra, R. Dussart, J.-B. Lee, M. J. Goeckner, T. Dufour, P. Lefaucheux, P. Ranson, L. Overzet, “Fabrication process and electrical characterization of direct current parallel micro-discharges in helium”, The 60th Annual Gaseous Electronics Conference, Arlington, VA, October 2007.
      • Berj Gimi, Joonbum Kwon, and J.-B. Lee, “Islet encapsulation in epoxy-based microcontainers”, Diabetes Technology Meeting 2007, San Francisco, CA, October 2007.
      • K. Colinjivadi, D. Pierce, and J.-B. Lee, “Polymer chopstick gripper for repeatable cell manipulation”, Tex MEMS IX Conference, Lubbock, TX, September 2007.
      • Yonghao Cui, Qi Wu, E. Schonbrun, Mark Tinker, J.-B. Lee, and W. Park, “Silicon-based photonic crystal TM polarizer”, Tex MEMS IX Conference, Lubbock, TX, September 2007.
      • S. Cho, E. Keefer, M. Romero-Ortega, G. Hughes, and J.-B. Lee, “A new SU8-based grooved microelectrode array for improved extracellular recording”, Tex MEMS IX Conference, Lubbock, TX, September 2007.
      • Yonghao Cui, Qi Wu, E. Schonbrun, Mark Tinker, J.-B. Lee, and W. Park, “Silicon-based 2D slab photonic crystal TM polarizer in telecommunication wavelength”, The 7th IEEE Conference on Nanotechnology (IEEE Nano 2007), Hong Kong, August 2007.
      • Brandon Pillans, Frank Morris, Prem Chahal, Gary Frazier, and J.-B. Lee, “Schottky Barrier Contact-Based RF MEMS Switch”, 2007 IEEE International Microwave Symposium (MTT 2007), Honolulu, HI, June 2007.
      • K. Colinjivadi, J.-B. Lee, and R. Draper, “Viable cell handling with high aspect ratio polymer chopstick gripper mounted on a nano precision manipulator”, The 7th International Workshop on High Aspect Ratio Microstructure Technology (HARMST 2007), Besancon, France, June 2007.
      • D. Park and J.-B. Lee, “Chip-Level Integration of RF MEMS On-Chip Inductors using UV-LIGA Technique”, The 7th International Workshop on High Aspect Ratio Microstructure Technology (HARMST 2007), Besancon, France, June 2007.
      • K. Colinjivadi, Y. Cui, M. Ellis, G. Skidmore, and J.-B. Lee, “De-Tethering Of High Aspect Ratio Metallic and Polymeric MEMS/NEMS Parts for the Direct Pick-And-Place Assembly of 3D Microsystem”, The 7th International Workshop on High Aspect Ratio Microstructure Technology (HARMST 2007), Besancon, France, June 2007.
      • Hong Lu, C. Goldsmith, and J.-B. Lee, “Inductively Coupled MEMS-based Micro RFID Transponder”, SPIE Microtechnologies for the New Millennium 2007 Conference, Gran Canaria, Spain, May 2007.
      • A. Nallani and J.-B. Lee, “Ferromagnetic 3-D Impellor-Shaped Micro-Stirrer Bar for Micromixing”, SPIE Microtechnologies for the New Millennium 2007 Conference, Gran Canaria, Spain, May 2007.
      • Brandon Pillans, Frank Morris, Prem Chahal, Gary Frazier, and J.-B. Lee, “Schottky Barrier Contact-Based RF MEMS Switch”, The 20th IEEE International Conference on Micro Electro Mechanical Systems (MEMS 2007), Kobe, Japan, January 2007.
      • Hong Lu, C. Goldsmith, L. Cauller, J.-B. Lee, “MEMS-Based Inductively Coupled RFID Transponder for Implantable Wireless Sensor Applications”, The 10th Joint IEEE International Magnetics Conference and Magnetism and Magnetic Materials Conference (MMM-Intermag 2007), Baltimore, Maryland, January 2007.

 

[2006]

      • J.-B. Lee, “Polymeric MEMS for Bio, Photonics and RF Applications”, 2006 International Conference on Nano Science and Nano Technology, Gwangju, Korea, December 2006. (Invited)
      • Arun Nallani, J.-B. Lee, David Wallace, and Don Hayes, “Novel 3-D impellor-shaped ferromagnetic micro-stirrer and its use for active micromixing”, The 10th International Conference on Miniaturized Systems for Chemistry and Life Sciences (MicroTAS 2006), Tokyo, Japan, November 2006.
      • K. Colinjivadi, Y. Cui, M. Ellis, G. Skidmore, and J.-B. Lee, “De-tethering of metallic and polymeric MEMS/NEMS parts for the direct pick-and-place assembly of 3D microsystem”, 2006 ASME International Engineering Congress and Exposition (ASME 2006), Chicago, IL, November 2006.
      • K. Colinjivadi, J.-B. Lee, R. Draper, M. Ellis, G. Skidmore, and G. Hughes, “Polymer grippers as end-effectors for biological sample manipulation”, 2006 ASME International Engineering Congress and Exposition (ASME 2006), Chicago, IL, November 2006.
      • Hong Lu, Sung-Hoon Cho, J.-B. Lee, Lawrence Cauller, Mario Romero-Ortega, and Gareth Hughes, “SU8-Based Micro Neural Probe for Enhanced Chronic in-Vivo Recording of Spike Signals from Regenerated Axons”, The 5th IEEE Conference on Sensors, Daegu, Korea, October 2006.
      • K. Colinjivadi, Y. Cui, M. Ellis, G. Skidmore, and J.-B. Lee, “De-tethering of metallic and polymeric MEMS/NEMS parts for the direct pick-and-place assembly of 3D microsystem”, TexMEMS VIII Conference, Richardson, TX, October 2006.
      • Hong Lu, Sung-Hoon Cho, Lawrence Cauller, Mario Romero-Ortega, Gareth Hughes, and J.-B. Lee, “Chronic in-vivo Recording of Neural Signals from Regenerated Axons Using Biocompatible SU8-Based Neural Probe in Nerve Regeneration Guide”, TexMEMS VIII Conference, Richardson, TX, October 2006.
      • T. Merkin, S. Jung, D. Park, and J.-B. Lee, “An ultra-wideband low noise amplifier with air-suspended RF MEMS inductors”, 2006 IEEE International Conference on Ultra-Wideband, Waltham, Massachusetts, September 2006. (won the Best Student Paper Award)
      • W. Park, E. Schonbrun, Q. Wu, Y. Yamashita, C. J. Summers, M. Tinker, Y. Cui, and J.-B. Lee, “Negative refraction in Si-based 2-diemnsional slab photonic crystal structures”, OSA Topical Meeting on Photonic Metamaterials, Grand Bahamas Island, June 2006.
      • Tanja Kmecko, Gareth Hughes, Larry Cauller, J.-B. Lee, and Mario Romero-Ortega, “Nanocomposites for Neural Interfaces”, MRS Spring Meeting, San Francisco, CA, April 2006.
      • W. Park, E. Schonbrun, Q. Wu, Y. Cui, M. Tinker, J.-B. Lee, T. Yamashita and C. J. Summers, “Negative Index Imaging by Si-Based 2D Photonic Crystal Structures”, MRS Spring Meeting, San Francisco, CA, April 2006.
      • A. Nallani, D. Silva, D. Wallace, D. Hayes, and J.-B. Lee, “A microfluidic mixer based on novel 3D impellor-shaped ferromagnetic micro-stirrer bar”, 2006 IEEE International Conference on Nano/Micro Engineered and Molecular Systems (NEMS 2006), Zhuhai, China, January 2006.
      • Jeong-Soo Lee, D. Park, A. Nallani, Y. Cui, A. Skoyles, and J.-B. Lee, “High-Aspect Ratio Metallic Nano Grippers”, 2006 IEEE International Conference on Nano/Micro Engineered and Molecular Systems (NEMS 2006), Zhuhai, China, January 2006.

 

[2005]

      • Mark Tinker and J.-B. Lee, “Thermo-optic photonic crystal light modulator”, Tex MEMS VII Conference, El Paso, TX, September 2005.
      • Yonghao Cui, Daniel S. Park, Hong Lu, Aidan Skoyles, and J.-B. Lee, “Development of microelectrode array for electrical bioimpedance measurement”, Tex MEMS VII Conference, El Paso, TX, September 2005.
      • Karthik Colinjivadi, M. Ellis, G. Skidmore, and J.-B. Lee, “Development of polymer microgrippers”, Tex MEMS VII Conference, El Paso, TX, September 2005.
      • E. Schonbrun, W. Park, M. Tinker, and J.-B. Lee, “Focusing in the Second Band of a Flexible Photonic Crystal”, SPIE Optics Photonics 2005, August 2005.
      • W. Park, E. Schonbrun, Q. Wu, M. Tinker, and J.-B. Lee, “Tunable Negative Refraction in Si-Polymer Photonic Crystal Membrane”, The Sixth International Symposium on Photonic and Electromagnetic Crystal Structures, Crete, Greece, June 2005.
      • Hong Lu, Brandon Pillans, Jong-Chan Lee, and J.-B. Lee, “High aspect ratio air core solenoid inductors using improved UV-LIGA process with contrast enhancement material”, The 6th International Workshop on High Aspect Ratio Microstructure Technology (HARMST 2005), Gyeongju, Korea, June 2005.
      • K. Kim and J.-B. Lee, “High aspect ratio tapered hollow metallic microneedle arrays with microfluidic interconnector”, The 6th International Workshop on High Aspect Ratio Microstructure Technology (HARMST 2005), Gyeongju, Korea, June 2005.
      • A. Nallani, T. Chen, J.-B. Lee, D. Hayes, and D. Wallace, “Microlens array and micro clampers for high performance optoelectronic devices packaging”, The 13th International Conference on Solid-State Sensors, Actuators & Microsystems (Transducers 2005), Seoul, Korea, June 2005.
      • M. Tinker, J.-B. Lee, E. Schonbrun, and W. Park, “Negative refraction based on the superprism effect in a micromachined flexible photonic crystal”, SPIE Microtechnologies for the New Millennium 2005 Conference, Seville, Spain, SPIE vol. 5840, pp. 147-154, May 2005.
      • A. Nallani, T. Chen, J.-B. Lee, D. Hayes, and D. Wallace, “Wafer level optoelectronic device packaging using MEMS” ,SPIE Microtechnology for the New Millennium 2005 Conference, Seville, Spain, SPIE vol. 5836, pp. 116-127, May 2005. (Invited)
      • H. Trost, T. Chen, M. Grove, R. Hoenigman, D. Radulescu, D. Silva, D. Taylor, A. Nallani, and J.-B. Lee, “Ink-jetting polymers for electronic, optical and biomedical micro-devices”, ASPE 2005 Spring Topical Meeting on Precision Micro/Nano Scale Polymer Based Component and Device Fabrication, Columbus, Ohio, April 2005.
      • W. Park, E. Schonbrun, Q. Wu, M. Tinker, and J.-B. Lee, “Mechanically tunable nanophotonic devices”, MRS Spring Meeting, San Francisco, CA, April 2005.
      • J.-B. Lee, “Nano electro mechanical grippers and tunable nano photonic devices”, The 7th Microelectromechanical Systems Conference, Jeju Island, Korea, April 2005. (Invited, Key Note Speech)
      • J.-B. Lee, “Silicon nanophotonics and sub-micron thermal actuators”, The US-Korea Forums on Nanotechnology, Los Angeles, CA, February 2005. (Invited)
      • N. Sarkar, D. Yan, M. Ellis, E. Horne, J.-B. Lee, H. Lu, R. Mansour, A. Nallani, G. Skidmore, “Microassembled tunable MEMS inductor”, The 18th IEEE International Conference on Micro Electro Mechanical Systems (MEMS 2005), pp. 183-186, Miami, FL, January 2005.

 

[2004]

      • A. Nallani, T. Chen, J.-B. Lee, D. Hayes, D. Wallace, “Metallic MEMS structures for assembly of optoelectronic components”, IMAPS Optoelectronics Devices Packaging Topical Workshop, Bethlehem, PA, October 2004.
      • Jeong-Soo Lee, D. Park, A. Nallani, G. Lee, J.-B. Lee, M. Ellis, and G. Skidmore, “Design, fabrication and characterization of sub-micron thermal actuators” ,Tex MEMS VI Conference, College Station, TX, September 2004.
      • H. Lu, J-C. Lee, and J.-B. Lee, “Improvement of SU-8-based high aspect ratio UV-LIGA process using contrast enhancement materials”, Tex MEMS VI Conference, College Station, TX, September 2004.
      • A. Nallani, D. Silva, J.-B. Lee, and D. Hayes, “In-Situ magnetic microfluidic mixing technique for inkjet applications”, Tex MEMS VI Conference, College Station, TX, September 2004.
      • M. Tinker, J.-B. Lee, E. Schonbrun, and W. Park, “Negative refraction based on the superprism effect in a micromachined flexible photonic crystal”, Tex MEMS VI Conference, College Station, TX, September 2004.
      • W. Park, E. Schonbrun, M. Tinker, and J.-B. Lee, “Tunable nanophotonic device based on flexible photonic crystal”, SPIE International Symposium on Optical Science and Technology, SPIE vol. 5511, pp. 165-172, Denver, CO, August 2004.
      • Youngkyun Jeong, Daniel S. Park, Sungyong Jung, and J.-B. Lee, “CMOS VCO & LNA implemented by air suspended on-chip RF MEMS LC with CMOS process”, 2004 IEEE International Midwest Symposium on Circuits and Systems, pp. 373-376, Hiroshima, Japan, July 2004.
      • H. Lu, B. Pillans, and J.-B. Lee, “Micromachined on-chip high aspect ratio air core solenoid inductor for multi-GHz applications,” in Symposium Digest 2004 IEEE International Microwave Symposium, pp. 881-884, Fort Worth, TX, June 2004.
      • W. Park, E. Schonbrun, M. Tinker, and J.-B. Lee, “Flexible photonic crystal – a new pathway to tunability,” Technical Digest of the 5th International Symposium on Photonic and Electromagnetic Crystal Structures (PECS-V), pp. 241, Kyoto, Japan, March 2004.

 

[2003]

      • E. Joseph, M. Goeckner, L. Overzet, D. Park, M. Tinker, and J.-B. Lee, “Optical characterization of poly-dimethyl siloxane (PDMS) during inductively coupled plasma processing for implementation in a PDMS-based photonic crystal”, 50th American Vacuum Society International Symposium, Baltimore, MD, November 2003.
      • B. Pillans, G. Rebeiz, and J.-B. Lee, “Advances in RF MEMS technology”, in The Technical Digest 2003 IEEE Gallium Arsenide Integrate Circuit Symposium, pp. 17-20, San Diego, CA, November 2003. (Invited, Plenary Session Speech)
      • A. Puntambekar, C. Hong, C. Gao, X. Zhu, R. Trichur, J. Han, S. H. Lee, J. Kai, J. Do, R. Rong, S. Chilukuru, M. Dutta, L. Ramasamy, S. Murugesan, R. Cole, J. Nevin, G. Beaucage, J.-B. Lee, J. Y. Lee, M. Bissell, J.-W. Choi and C. H. Ahn, “Smart Disposable Plastic Lab-on-a-Chip for Point-of-Care-Testing (POCT)”,; Proceedings of the 7th International Conference on Micro Total Analysis Systems (micro-TAS 2003), pp.1291-1294, Monterey, California, October 5-9, 2003.
      • T. Chen, D. Hayes, D. Wallace, A. Nallni, and J.-B. Lee, “Inkjet printing for optical/electrical interfacing of VCSEL and PD arrays”, in the Proceedings of the 36th International Symposium of Microelectronics, Boston, MA, Novemmber 2003.
      • K. Kim, A. Geisberger, M. Chiew, K. Bray, K. Tham, M. Ellis, G. Skidmore, T. Khoury, H. Lu, S. Park, J.-B. Lee, “Development of metallic microgrippers as end-effectors for micro/nano assembler”, The 5th International Workshop on High Aspect Ratio Microstructure Technology, Monterey, CA, June 2003.
      • A. Nallani, S. W. Park and J.-B. Lee, “Realization of High-Aspect Ratio Sub-Micron Metallic Structures Using SU-8 as a Resist for Electron Beam Lithography”, Tex MEMS V Conference, Fort Worth, TX, May 2003.
      • H. Lu, K. Colinjivadi and J.-B. Lee, “Design Optimization of Micromachined High Aspect Ratio 3D On-chip Solenoid Inductor”, Tex MEMS V Conference, Fort Worth, TX, May 2003.
      • K. S. Kim, T. Huang, R. Folaron, E. Nilsen, H. Lu, K. Colinjivadi, S. W. Park, J.-B. Lee, and Kyunghwan Kim, “Polymer/Metal Micromachining Methods and Their Role in the Development of MEMS-Based, Heterogeneous Microsystems”, Tex MEMS V Conference, Fort Worth, TX, May 2003.
      • A. Nallani, S. Park and J.-B. Lee, “Characterization of SU-8 as a photoresist for electron beam lithography”, in Proceedings of Microtechnology for the New Millennium 2003 Conference, SPIE vol. 5116, no. 1, pp. 414~423 , Canary Islands, Spain, May 2003.
      • N. Chomnawang, Hong Lu, K. Colinjivadi, and J.-B. Lee, “Design optimization of micromachined high aspect ratio 3D on-chip solenoid inductor”, in Proceedings of NanoTech 2003 Conference: Modeling and Simulation of Microsystems, pp. 392~395, San Francisco, CA, February 2003.
      • J.-B. Lee and Charles Goldsmith, “Numerical simulations of novel constant-charge biasing method for capacitive RF MEMS switch”, in Proceedings of NanoTech 2003 Conference: Modeling and Simulation of Microsystems, pp. 396~399, San Francisco, CA, February 2003.
      • J. Choi, A. Puntambekar, C. Hong, C. Gao, X. Zhu, R. Trichur, S. Chilukuru, M. Dutta, , S. Murugesan, S. Kim, Y. Sohn, J. Nevin, G. Beaucage, J.-B. Lee, J. Lee, and M. Bissell, C. Ahn, “A disposable plastic biochip cartridge with on-chip power sources for blood analysis”, in Proceedings IEEE Workshop on Micro Electro Mechanical Systems, pp. 447~450, Kyoto, Japan, January 2003.
      • T. Huang, E. Nilsen, G. Skidmore, C. Goldsmith , K. Kim, A. Nallani, J.-B. Lee, “3-D, self-aligned, micro-assembled, electrical interconnects for heterogeneous integration”, SPIE 2003 Micromachining and Microfabrication, vol. 4981, pp. 189-201, San Jose, CA, January 2003.

 

[2002]

      • B. Kim, J. Lee, K. Parikh, G. Ussery, P. Landon, A. Zakhidov, R. Baughman, S. Park, K. Kim, J.-B. Lee, B. Dunn, and E. Yablonivitch, “Photonic crystal sheets derived by self-assembly on lithographically patterned surfaces”, 2002 MRS Fall Meeting, Boston, Massachusetts, December, 2002.
      • Sangwon Park, A. Nallani and J.-B. Lee, “Fabrication of sub-micron scale metallic comb-drive actuator”, 49th American Vacuum Society International Symposium, Denver, CO, November 2002.
      • C. Ahn, J. Choi, A. Puntambekar, C. Hong, X. Zhu, C. Gao, R. Trichur, S. Chilukuru, M. Dutta, , S. Murugesan, S. Kim, Y. Sohn, J. Nevin, G. Beaucage, J.-B. Lee, J. Lee, and M. Bissell, “Disposable biochip cartridge for clinical diagnostics toward point-of-care systems”, The 6th International Conference on Miniaturized Chemical and Biochemical Analysis Systems, pp. 187~189, Nara, Japan, November 2002.
      • Sangwon Park, Kabseog Kim, W. Alan Davis, and J.-B. Lee, “Wafer-level batch transfer of RF MEMS passive device using PDMS”, in the Proceedings of the 35th International Symposium of Microelectronics, pp. 169~174, Denver, CO, September 2002.
      • S.W. Park, K.S. Kim, J.-B. Lee, and W.A. Davis, “Plastic-based pattern transfer process for RF MEMS passives”, IEEE 2002 Emerging Telecommunication Technologies Conference, Richardson, TX, September 2002.
      • N. Chomnawang, J.-B. Lee, and W.A. Davis, “Micromachined on-chip 3D inductors”, IEEE 2002 Emerging Telecommunication Technologies Conference, Richardson, TX, September 2002.
      • E. Nilsen, T. Huang, G. Skidmore, C. Goldsmith, J.-B. Lee, K. Kim, and A. Nallani, “Assembled micro-electrical interconnects”, Tex MEMS IV Conference, Lubbock, TX, July 2002.
      • J.-B. Lee, “RF MEMS devices for wireless communication”, in Proceedings of IMAPS/SMTA Telecom Hardware Solutions Conference, pp. 135~139, Plano, TX, May 2002.
      • N. Chomnawang and J.-B. Lee, “On-chip dome-shape spiral micro inductor for high frequency applications”, in Proceedings of the SPIE 2002 Smart Structures and Materials 2002: Smart Electronics, MEMS, and Nanotechnology, SPIE vol. 4700, pp. 50~57, San Diego, CA, March 2002.

 

[2001]

      • J. Choi, S. Kim, R. Trichur, H. Cho, A. Puntambekar, R. Cole, J. Simkins, S. Murugesan, Kabseog Kim, J.-B. Lee, G. Beaucage, J. Nevin, and C. Ahn, “A plastic micro injection molding technique using replaceable mold-disks for disposable microfluidic systems and biochips”, in the Proceedings of the 5th International Conference on Miniaturized Chemical and Biochemical Analysis Systems, pp. 411~412, Monterey, CA, October 2001.
      • D. Newlin, A. Pham, J. Harriss, and J.-B. Lee, “Development of organic-micromachined interconnects on Si substrates at microwave frequencies”, in the Proceedings of the 34th International Symposium on Microelectronics, pp. 44~47, Baltimore, MD, October 2001.
      • D. Newlin, A. Pham, J. Harriss, and J.-B. Lee, “Development of micromachined low loss transmission line on Si at microwave frequencies”, in Tech. Digest of IEEE RAWCON, pp. 181~183, Boston, MA, August 2001.
      • S. W. Park, K. S. Kim, and J.-B. Lee, “A novel CMOS-compatible polymer pattern transfer Technique for integrated MEMS”, International Conference on Materials for Advanced Technologies 2001, Singapore, July 2001.
      • Kab Seog Kim, Sang Won Park, J.-B. Lee, Harish Manohara, Yohanes Desta, Michael Murphy, and Chong H. Ahn, “Rapid replication of polymeric and metallic high aspect ratio microstructures using PDMS and LIGA technology”, The 4th International Workshop on High Aspect Ratio Microstructure Technology, Baden-Baden, Germany, June 2001.
      • N. Chomnawang, Sangwon Park, Kabseog Kim, J.-B. Lee, and A. Pham, “On-chip RF MEMS components for high frequency applications”, Tex MEMS III Conference, Richardson, TX, June 2001.
      • K. S. Kim, S. W. Park, J.-B. Lee, and C. Ahn, “Polymeric metallic micromachining techniques for bio MEMS”, Tex MEMS III Conference, Richardson, TX, June 2001.
      • N. Chomnawang and J.-B. Lee, “On-chip 3D air core micro inductor for high frequency applications using deformation of sacrificial polymer”, in Proceedings of the SPIE 2001 Smart Electronics and MEMS, SPIE vol. 4334, pp. 54~62, Newport Beach, CA, March 2001.
      • S. W. Park, K. S. Kim, H. Manohara, and J.-B. Lee,”Massive replication of polymeric high aspect ratio microstructures using PDMS casting”, in Proceedings of the SPIE 2001 Smart Electronics and MEMS, SPIE vol. 4334, pp. 271~279, Newport Beach, CA, March 2001.

 

[1993-2000]

      • Kab Seog Kim, Sang Won Park, Harish Manohara, and J.-B. Lee, “Polydimethylsiloxane (PDMS) for high aspect ratio three-dimensional MEMS”, in Proceedings of the 2000 International Symposium on Mechatronics and Intelligent Mechanical Systems for 21 Century, pp. 55~59, Changwon, Korea, October 2000.
      • J.-B. Lee, M. G. Allen, and A. Rohatgi, “Photovoltaic on-demand pulse generator as an on-board power source for electrostatic actuator array”, SPIE Symposium on Micromachining and Microfabrication, SPIE vol. 3878, pp. 328~336, Santa Clara, California, September 1999.
      • M. Feldman and J.-B. Lee, “Thermal compensation of X-ray mask distortions”, The 43rd International Conference on Electron, Ion and Photon Beam Technology and Nanofabrication, Late News, Marco Island, FL, June 1999.
      • S. P. Chang, J.-B. Lee, and M. G. Allen, “An 8×8 robust capacitive pressure sensor array”, Symposium on MEMS, 1998 ASME International Mechanical Engineering Congress and Exposition, pp.513~517, Anaheim, California, November 1998.
      • J.-B. Lee, S. P. Chang, and M. G. Allen, “A robust capacitive pressure sensor array”, IEEE Solid-State Sensor and Actuator Workshop, Late News, Hilton Head Island, SC, June 1998.
      • D. S. Kercher, O. Brand, J.-B. Lee, and M. G. Allen, “Microjet cooling devices for thermal management of microelectronics devices”, IEEE Solid-State Sensor and Actuator Workshop, Open Poster, Hilton Head Island, SC, June 1998.
      • J.-B. Lee and M. G. Allen, “Fabrication techniques for metallic micromachined devices on silicon foundry circuits”, The 2nd Samsung Humantech Thesis Prize, Seoul, Korea, February 1996 (won the First prize)
      • T. C. Hodge, S. A. Bidstrup, P. A. Kohl, J.-B. Lee, and M. G. Allen, “In-situ determination of thickness direction thermal strain of spin-coated polymer films”, International Symposium on Advanced Packaging Materials, Atlanta, GA, February 1995. (won the Best Poster paper award)
      • T. C. Hodge, S. A. Bidstrup, P. A. Kohl, J.-B. Lee, and M. G. Allen, “Mechanical anisotropy in interlevel polymer dielectric films”, AIChE Meeting, San Francisco, CA, November 1994.
      • T. C. Hodge, P. A. Kohl, S. A. Bidstrup, J.-B. Lee, and M. G. Allen, “In-situ thermal expansion measurements of interlevel dielectric polymer films”, Fifth International Conference on Polyimide Films, Ellenville, NY, November 1994.
      • J.-B. Lee, Z. Chen, M. G. Allen, and A. Rohatgi, “A hybrid micro system using a high voltage solar cell array as a power supply”, in Proceedings 1994 International Symposium on Microelectronics, SPIE vol. 2369, pp. 438~443, Boston, MA,s November 1994.
      • T. C. Hodge, P. A. Kohl, S. A. Bidstrup, J.-B. Lee, and M. G. Allen, “An in-situ measurement technique for through-plane thermal properties of thin dielectric film”, in Proceedings International Conference and Exhibition Multichip Modules, SPIE vol. 2256, pp.344~349, April 1994.
      • S. A. Bidstrup, T. C. Hodge, L. Lin, P. A. Kohl, J.-B. Lee, and M. G. Allen, “Anisotropy in thermal, electrical and mechanical properties of spin-coated polymer dielectrics”, Materials Reliability in Microelectronics IV. Symposium, pp. 577~587, San Francisco, CA, April 1994. (Invited)
      • J.-B. Lee, Z. Chen, M. G. Allen, A. Rohatgi, and R. Arya, “A high voltage solar cell array as an electrostatic MEMS power supply”, in Proceedings 7th IEEE Workshop on Micro Electro Mechanical Systems, pp. 331~336, Oiso, Japan, January 1994.
      • T. C. Hodge, P. A. Kohl, S. A. Bidstrup, J.-B. Lee, and M. G. Allen, “An in-situ measurement technique for through-plane thermal properties of thin polymer films”, AIChE meeting, St. Louis, MO, November 1993.

 

 

Miscellaneous

Patents

      • Steven Foland and J.-B. Lee, “Highly compliant resonant diffraction gratings, and methods and use thereof” U. S. Patent 9,234,991, January 12, 2016.
      • Kabseog Kim and J-B. Lee, “Method for tapered hollow metallic microneedle array”U. S. Patent 7,627,938,Dec. 2009.
      • W. Park, J-B. Lee, E. Schonbrun, and Mark Tinker, “Strain tunable flexible photonic crystals”U. S. Patent 7,283,716, Oct. 2007.
      • E. Nilsen, M. Ellis, C. Goldsmith, T. Huang, A. Nallani, K. Kim, J-B. Lee, G. Skidmore, “Method for electrical interconnects between assembled micro-components utilizing post-assembly activation”U. S. Patent 7,096,568, August 2006.
      • J-B. Lee, Sang Won Park, Kabseog Kim, and Harish Manohara, “Methods of rapid reproduction of metallic micromold inserts,”U. S. Patent 6,692,680,Feb. 2004.
      • M. G. Allen, S. P. Chang, and J-B. Lee, “Robust substrate-based micromachining techniques and their application to micromachined sensors and actuators,”U. S. Patent 6,458,618, Oct, 2002.

Book and Book Chapters

      • Daeyoung Kim and JB Lee, “Micro-Nano Hierarchical Super Lyophobic Surfaces against Gallium based Liquid Metal Alloy,” in Surface Energy, (Intech), Chapter 9, pp. 265 – 287, ISBN 978-953-51-2216-6, Dec. 2015.
      • Yoon, Youngsam; Lee, Dong-Weon; Lee, Jeong-Bong. “Thin Films: Optically-Transparent, Super-Hydrophobic, Hierarchical Micro- and Nanostructures,” Dekker Encyclopedia of Nanoscience and Nanotechnology, 3rd Edition. (CRC Press: New York),pp. 4908–4919, March 2014.
      • Sung-Hoon Cho, “Chronically implantable SU8 based neural probes: Neural spike signal detection from regenerated peripheral nerve fibers,” VDM Verlag Dr. Mueller e.K., 2009. (Available at Amazon.com)
      • Yong-Jun Shin, “Digital Microfluidics for Systems Biology”, VDM Verlag Dr. Mueller e.K., 2008. (Thesis Publication)
      • Kabseog Kim and J-B. Lee, “MEMS for drug delivery”, in BioMEMS Devices and Systems, (CRC Press, Boca Raton, FL), Chapter 19, 2006.
      • J-B. Lee, “On-board power suply and remote driving mechanisms for MEMS”, in IEEE/CRC Industrial Electronics Handbook, (CRC Press, Boca Raton, FL), Chapter 119, pp. 1538~1546, May 1997.

Magazines

      • W. Park and J.-B. Lee, “Mechanically Tunable Photonic Crystals,” Optics and Photonics News, v. 20, n. 1, pp.40~45, January 2009.
      • Kabseog Kim, D. Park, and J.-B. Lee, “Tall Tapered Hollow Metallic Micro-Needle,” Micronews, n. 58, p. 8, May 2007.