Department of
Materials Science and Engineering
Faculty
Professors: Yves J. Chabal (Head), Massimo V. Fischetti,
Bruce E. Gnade, Julia W. Hsu (Associate Head), Moon
J. Kim, Robert M. Wallace
Associate Professors: Kyeongjae (KJ) Cho, Lev D. Gelb, Jiyoung Kim, Manuel Quevedo,
Amy V. Walker
Assistant Professors: Christopher L. Hinkle,
Walter E. Voit
Professor Emeritus: Don W. Shaw
UTD Affiliated
Faculty: Ray
H. Baughman (Chemistry), Wonjae Choi (Mechanical
Engineering), Xin-Lin Gao
(Mechanical Engineering), Matthew J. Goeckner (Electrical Engineering), Fatemeh Hassanipour
(Mechanical Engineering), Gil
S. Lee (Electrical Engineering), J.B. Lee (Electrical Engineering), Mark Lee (Physics), Hongbing
Lu (Mechanical
Engineering), Anton
Malko (Physics), Padmakumar
Nair (School of Management),
Larry J. Overzet (Electrical Engineering), Dennis Smith
(Chemistry), Mihaela Stefan (Iovu)
(Chemistry), Anvar Zakhidov
(Physics).
Adjunct Faculty: Shela Aboud
(Stanford University), Husam Alshareef (KAUST,
Saudia Arabia), Glen Birdwell (Army Research
Laboratories), Luigi Colombo
(Texas Instruments),
Mathew David Halls (Materials Design), Richard Irwin (Texas Instruments), Oleg Lourie
(Nanofactory Instruments Inc.), Prashant
Majhi (SEMATECH, Austin, Texas), Steven Mick (Protochips,
Inc.), Bhabendra Pradahn (NanoHoldings LLC), Bin Shan (Huazhong
University of Science and Technology), Purushothaman Srinivasan (Texas Instruments), Scott Summerfelt
(Texas Instruments), Eric M. Vogel (Georgia Tech).
Objectives
The objective
of the Master of Science (M.S.) degree in materials science and
engineering is
to provide
intensive preparation for the professional
practice in modern materials science by those engineers and scientists who wish to continue their education.
Courses are offered at times and locations convenient for the student who is
employed on a full-time basis.
The objective of the Doctor of Philosophy
(Ph.D.)
program in materials science and engineering is to prepare individuals to
perform original, cutting-edge research in materials science, particularly in the areas of nano-structured materials, electronics, optical and magnetic materials,
bio-mimetic materials, polymeric materials, MEMS materials and systems, organic
electronics, and advanced processing of modern materials.
Scholarship Opportunities
The Erik Jonsson School of Engineering and Computer Science offers
competitive scholarship awards for very well qualified students. Interested
students should request application materials by contacting the Department of
Materials Science and Engineering.
Master of Science in Materials Science
and Engineering
Admission Requirements
The University’s general admission
requirements are discussed here.
A
student lacking undergraduate prerequisites for graduate courses in Materials
Science and Engineering must
complete these prerequisites or receive approval from the graduate adviser and
the course instructor. A diagnostic exam may be required. Specific admission
requirements are as follows:
•
Student
has met standards equivalent to those currently required for admission to the
Ph.D. or Master’s degree programs in Materials Science, Electrical Engineering,
Chemistry, Physics, or Biology.
•
A
grade-point average in undergraduate-level course work of 3.5 or better on a
4-point scale.
•
GRE
scores of 500, 700 and 4 for the verbal, quantitative and analytical writing
components, respectively, are advisable based on our experience with student
success in the program.
Students,
who fulfill only some of the above requirements, if admitted conditionally,
will be required to take graduate level courses as needed to make up any
deficiencies.
Degree Requirements
The University’s general degree
requirements are discussed here.
The
MSEN M.S. degree requires a minimum of 33 semester credit hours.
All
students must have an academic advisor and an approved degree plan. These are
based upon the student’s choice of concentration. Courses taken without advisor
approval will not count toward the 33 semester-hour requirement. Successful
completion of the approved course of studies leads to the M.S. degree.
M.S.
students undertaking the non-thesis option must complete at least 33 semester
credit hours of coursework with a grade of B or better.
M.S.
students undertaking the thesis option must carry out a research project under
the direction of a faculty or affiliated faculty in Materials Science and
Engineering, and complete and defend a thesis on the research project, but they
need only complete the four core courses and 9 semester credit hours of
advanced course work. A Supervisory Committee will be
appointed once the faculty member accepts the student for a research project.
The rules for the thesis defense are specified by the Office of the Dean of
Graduate Studies.
For
each of the proposed degree programs, students must obtain a grade of B- or
better in each class and maintain an average core class GPA of at least 3.0 to
remain in good standing and satisfy their degree requirements:
•
MSEN
5310 Thermodynamics of Materials
•
MSEN
5360 Materials Characterization
•
MSEN 6324 (EEMF 6324)
Electronic, Optical and Magnetic Materials
•
MSEN
6319 Quantum Mechanics for Materials Scientists
Note:
the presence of a course number in parentheses indicates that this course is
cross-listed in another department.
A
minimum of 9 semester credit hours of advanced coursework is required, from the
following list:
•
MSEN
5320 Materials Science for Sustainable Energy
•
MSEN
5340 (CHEM 5340) Advanced Polymer Science and Engineering
•
MSEN
5361 Fundamentals of Surface and Thin Film Analysis
•
MSEN
5370 Ceramics and Metals
•
MSEN
5375 (PHYS 5375) Electronic Devices Based On Organic Solids
•
MSEN
5377 (PHYS 5377) Computational Physics of Nanomaterials
•
MSEN
6310 (MECH 6301) Mechanical Properties of Materials
•
MSEN
6320 (EEMF 6320) Fundamentals of Semiconductor Devices
•
MSEN
6330 Phase Transformations
•
MSEN
6340 Advanced Electron Microscopy
•
MSEN
6350 Imperfections in Solids
•
MSEN
6362 Diffraction Science
These
courses are intended to provide greater depth and advanced training in areas
broadly relevant to Materials Science and Engineering research.
The
remaining credit hours are to be taken from the following list of Specialized
Courses (or approved electives from Physics, Chemistry, Biology, Electrical
Engineering, Mechanical Engineering or other departments):
•
MSEN
5300 (PHYS 5376) Introduction to Materials Science
•
MSEN
5331 (CHEM 5331) Advanced Organic Chemistry I
•
MSEN
5333 (CHEM 5333) Advanced Organic Chemistry II
•
MSEN
5341 (CHEM 5341) Advanced Inorganic Chemistry
•
MSEN
5344 Thermal Analysis
•
MSEN
5353 Integrated Circuit Packaging
•
MSEN
5355 (CHEM 5355) Analytical Techniques I
•
MSEN
5356 (CHEM 5356) Analytical Techniques II
•
MSEN
5371 (PHYS 5371) Solid State Physics
•
MSEN
5383 (PHYS 5383 and EEMF 5383) Plasma Technology
•
MSEN
5410 (BIOL 5410) Biochemistry of Proteins and Nucleic Acids
•
MSEN
5440 (BIOL 5440) Cell Biology
•
MSEN
6313 (EEOP 6313) Semiconductor Opto-Electronic
Devices
•
MSEN
6321 (EEMF 6321) Active Semiconductor Devices
•
MSEN
6322 (EEMF 6322, MECH 6322) Semiconductor Processing Technology
•
MSEN
6341 Advanced Electron Microscopy Laboratory
•
MSEN
6348 (EEMF 6348) Lithography and Nanofabrication
•
BMEN
6355 (MSEN 6355) Nanotechnology and Sensors
•
MSEN
6358 (BIOL 6358) Bionanotechnology
•
MSEN
6361 (MECH 6361) Deformation Mechanisms in Solid Materials
•
MSEN
6371 (PHYS 6371) Advanced Solid State Physics
•
MSEN
6374 (PHYS 6374) Optical Properties Of Solids
•
MSEN
6377 (PHYS 6377) Physics of Nanostructures: Carbon Nanotubes, Fullerenes,
Quantum Wells, Dots and Wires
•
MSEN
6382 (EEMF 6382) Introduction to MEMS
•
MSEN
7320 (EEMF 7320) Advanced Semiconductor Device Theory
•
MSEN
7V80 Special Topics in Materials Science and Engineering
•
MSEN
8V40 Individual Instruction in Materials Science and Engineering
•
MSEN
8V70 Research In Materials Science and Engineering
•
MSEN
8V98 Thesis
The specialized
courses are intended to provide Materials Science and Engineering graduate
students with expertise in a specific field of endeavor.
Doctor of Philosophy
in Materials Science and Engineering
Admission Requirements
The University’s general admission
requirements are discussed here.
A
student lacking undergraduate prerequisites for graduate courses in Materials
Science and Engineering must
complete these prerequisites or receive approval from the graduate adviser and
the course instructor.
A
diagnostic exam may be required. Specific admission requirements follow.
The
student entering the MSEN program should meet the following guidelines:
•
Student
has met standards equivalent to those currently required for admission to the
Ph.D. or Master’s degree programs in Materials Science, Electrical Engineering,
Chemistry, Physics, or Biology.
•
a
grade-point average in undergraduate-level course work of 3.5 or better on a
4-point scale
•
GRE
scores of 500, 700 and 4 for the verbal, quantitative and analytical writing
components, respectively, are advisable based on our experience with student
success in the program.
Students who fulfill some of the above
requirements, if admitted conditionally, will be required to take graduate level
courses as needed to make up any deficiencies.
Degree Requirements
The University’s general degree
requirements are discussed here.
The MSEN
Ph.D. requires a minimum of 75 semester hours beyond the baccalaureate degree. These credits must include at
least 30 semester hours of graduate-level courses in MSEN.
All students
must have an academic advisor and an approved degree plan. Courses taken
without advisor approval will not count toward the 75 semester-hour
requirement.
Each doctoral student must carry out original
research in the area of Materials Science and Engineering, under the direction
of a faculty or affiliated faculty of Materials Science and Engineering, and
complete and defend a dissertation on the research project. A Supervisory Committee will be appointed once
the faculty member accepts the student for a research project. Students
must be admitted to doctoral candidacy by passing a Qualifying Exam, which will
be administered near the time that the students have completed their course
work. Upon passing the Qualifying Exam,
students must present and defend a Research Proposal with their Supervisory
Committee within approximately nine months or sooner after passing the
Qualifying Exam.
The rules for the dissertation research and defense are specified by the Office
of the Dean of Graduate Studies.
For
the proposed degree program, students must obtain a grade of B- or better in
each class and maintain an average core class GPA of at least 3.0 to remain in
good standing and satisfy their degree requirements:
•
MSEN
5310 Thermodynamics of Materials
•
MSEN
5360 Materials Characterization
•
MSEN
6319 Quantum Mechanics for Materials Scientists
•
MSEN 6324 (EEMF 6324)
Electronic, Optical and Magnetic Materials
Note:
the presence of a course number in parentheses indicates that this course is
cross-listed in another department.
A
student may petition for waiver of core courses based on prior coursework of
equivalent scope and level, and if the Department finds that the student has
already mastered the course material, the student may replace that core course
with elective courses for up to a total of twelve semester credit hours.
A
minimum of 9 semester credit hours of advanced coursework is required, from the
following list:
•
MSEN
5320 Materials Science for Sustainable Energy
•
MSEN
5340 (CHEM 5340) Advanced Polymer Science and Engineering
•
MSEN
5361 Fundamentals of Surface and Thin Film Analysis
•
MSEN
5370 Ceramics and Metals
•
MSEN
5375 (PHYS 5375) Electronic Devices Based On Organic Solids
•
MSEN
5377 (PHYS 5377) Computational Physics of Nanomaterials
•
MSEN
6310 (MECH 6301) Mechanical Properties of Materials
•
MSEN
6320 (EEMF 6320) Fundamentals of Semiconductor Devices
•
MSEN
6330 Phase Transformations
•
MSEN
6340 Advanced Electron Microscopy
•
MSEN 6350 Imperfections in Solids
•
MSEN 6362 Diffraction Science
These
courses are intended to provide greater depth and advanced training in areas
broadly relevant to Materials Science and Engineering research.
The
remaining credit hours are to be taken from the following list of Specialized
Courses (or approved electives from Physics, Chemistry, Biology, or Electrical
Engineering, Mechanical Engineering, or other departments):
•
MSEN
5300 (PHYS 5376) Introduction to Materials Science
•
MSEN
5331 (CHEM 5331) Advanced Organic Chemistry I
•
MSEN
5333 (CHEM 5333) Advanced Organic Chemistry II
•
MSEN
5341 (CHEM 5341) Advanced Inorganic Chemistry
•
MSEN
5344 Thermal Analysis
•
MSEN
5353 Integrated Circuit Packaging
•
MSEN
5355 (CHEM 5355) Analytical Techniques I
•
MSEN
5356 (CHEM 5356) Analytical Techniques II
•
MSEN
5371 (PHYS 5371) Solid State Physics
•
MSEN
5383 (PHYS 5383 and EEMF 5383) Plasma Technology
•
MSEN
5410 (BIOL 5410) Biochemistry of Proteins and Nucleic Acids
•
MSEN
5440 (BIOL 5440) Cell Biology
•
MSEN
6313 (EEOP 6313) Semiconductor Opto-Electronic
Devices
•
MSEN
6321 (EEMF 6321) Active Semiconductor Devices
•
MSEN
6322 (EEMF 6322, MECH 6322) Semiconductor Processing Technology
•
MSEN
6341 Advanced Electron Microscopy Laboratory
•
MSEN
6348 (EEMF 6348) Lithography and Nanofabrication
•
BMEN
6355 (MSEN 6355) Nanotechnology and Sensors
•
MSEN
6358 (BIOL 6358) Bionanotechnology
•
MSEN
6361 (MECH 6361) Deformation Mechanisms in Solid Materials
•
MSEN
6371 (PHYS 6371) Advanced Solid State Physics
•
MSEN
6374 (PHYS 6374) Optical Properties Of Solids
•
MSEN
6377 (PHYS 6377) Physics of Nanostructures: Carbon Nanotubes, Fullerenes,
Quantum Wells, Dots and Wires
•
MSEN
6382 (EEMF 6382) Introduction to MEMS
•
MSEN
7320 (EEMF 7320) Advanced Semiconductor Device Theory
•
MSEN
7V80 Special Topics in Materials Science and Engineering
•
MSEN
8V40 Individual Instruction in Materials Science and Engineering
•
MSEN
8V70 Research In Materials Science and Engineering
•
MSEN
8V98 Thesis
•
MSEN
8V99 Dissertation
The
specialized courses are intended to provide Materials Science and Engineering
graduate students with expertise in a specific field of endeavor.
Description of
Facilities Available for Conducting Research
An extensive array of
the materials characterization, synthesis, and processing tools exist in the
Department for student use in research Characterization capabilities include
advanced high-resolution electron microscopy, x-ray diffraction, a large
variety of surface analysis methods, and electrical characterization. Thin film deposition methods include atomic
layer deposition, sputter deposition, thermal deposition, molecular beam epitaxy, chemical vapor deposition, pulksed
laser deposition, and gas phase adsorption.
Fabrication methods can be accomplished the Cleanroom Research Laboratory as well
(http://www.utdallas.edu/research/cleanroom/). Computational
modeling activities include studies from the atomistic to the macroscopic
level. Details of the capabilities and faculty research can be obtained at: http://mse.utdallas.edu/.